Go Back   Shipping History > Maritime Trade Specific Forums > The Engine Room

Post Reply
 
Thread Tools
  #1  
Old 27th August 2017, 08:30
Shelterdeck Shelterdeck is offline
Member
 
Join Date: Apr 2017
Location: West Lancashire
Posts: 24
Home-made morse key by an ex radio officer

Semi Automatic "Bug" Morse Key
Feeling like a change from ship models, a few days ago, I decided to try and build a semi-automatic bug key. This type of morse key was first developed in the United States. Conventional morse keys move up and down, and both dots and dashes have to be made manually. When I first went into passenger liners as a junior radio officer in 1965, I found it very hard going sending large numbers of messages, often containing hundreds of words. My wrist was quickly in danger of seizing up, so I obtained a cheap Japanese bug key in Cape Town. The bug key works horizontally, and the side of the palm can be rested on the desk. Pushing the paddle to the right with the thumb, produces a string of dots by vibrating a piece of weighted steel spring with electrical contacts fitted. Pushing it to the left with the forefinger, the dashes have to be made individually. I found this a great help, and was soon able to send for considerable lengths of time without getting tired. In the next twelve years, I got through two Japanese bug keys, the first being accidentally dropped by the third radio officer when it was only a few weeks old. That broke the paddle arm off, and I had to effect a temporary repair until I could replace it again in Cape Town. Despite being quite cheap, I had no complaints about the Japanese keys, they were really good. But I had heard that the American Vibroplex keys were the best of the best. Eventually, I was able to purchase on in Houston, Texas, for about 50. I used that one regularly from 1977 until leaving the sea in late 1992, and still have it today. The key illustrated is purely my own design based on trial and error, and it took almost a week to get it working correctly. I have compared it with my Vibroplex, and although I am a bit "rusty" at morse after 25 years, can still produce perfectly readable code, and cannot tell any difference in handling between mine and the Vibroplex,
I incorporated small ball races for the top and bottom bearings that gave a very smooth action. The spring steel is a piece of a junior hacksaw blade with the teeth ground off. The vertical pillars are all old rifle shells cut off to the correct length, and bolted to the acrylic base via holes drilled through ends. The dent caused by the firing pins was a great guide for the drill. The open tops were fitted with home-made caps made from brass, with a fancy brass bolt in the top for purely aesthetic reasons. Solving the spring problem was beyond me, as I could nor find any springs small enough, or of the correct strength. I got round this by using powerful neodymium magnets instead of springs, and they work really smoothly. The tension can be easily adjusted by moving the magnets further apart, or closer together. Neither could I get the dot contacts correct, so I used a small magnetic reed switch. It is actuated by a magnet fixed the vibrating arm. The speed of the dots can be adjusted by moving the brass weight along the vibrating arm. The closer it is moved to the front of the key, the faster the dots. Most of the construction is in brass. The base and paddle are acrylic sheet and the finger knob is a small "button knob" normaly used for glass cabinets.
This is my first attempt at making a "precision instrument" as most of my micro-engineering has been on very small model ships. No doubt there will be a lot of faults, by I feel it is pretty good for a first attempt!

Bob

Attached Images
File Type: jpg 1 (Medium).JPG (107.8 KB, 5 views)
File Type: jpg 2 (Medium).JPG (118.1 KB, 7 views)
File Type: jpg 3 (Medium).JPG (131.9 KB, 7 views)
File Type: jpg 4 (Medium).JPG (120.6 KB, 7 views)
Reply With Quote
  #2  
Old 27th August 2017, 09:25
BobClay's Avatar
BobClay United Kingdom BobClay is offline
Senior Member
 
Join Date: Apr 2017
Location: Cornwall UK
Posts: 369
Images: 39
Nice One !!
__________________
"I say we take off, nuke the site from orbit. It's the only way to be sure."
Corporal Hicks
Reply With Quote
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Computer Rooms at Home BobClay Computers and The Internet 6 12th July 2017 20:00
Home Improvements BobClay The Pig & Whistle 35 3rd June 2017 23:33
Morse Keys for sale ! Sparks69.5 The Radio Room 0 9th May 2017 09:07


All times are GMT +1. The time now is 23:31.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.